Your shopping cart is empty!
SLM Laser Light Source
application
The new single longitudinal mode (SLM) pulsed laser source ATG7200 from Webpetsupply features two wavelengths: 532 nm and 1064 nm. The ATG7200-532 has a peak power of up to 4 kW and a maximum single pulse energy of 100 μJ. The ATG7200-1064 boasts a peak power of up to 8 kW and a maximum single pulse energy of 200 μJ. The pulse width of the ATG7200 is less than 25 ns, with a beam divergence of less than 2 mrad and a beam diameter of approximately 2 mm at the aperture. These outstanding performance parameters enable it to excel in various high-precision application scenarios. The ATG7200 maintains power stability within 5% even after continuous operation for over 4 hours.
In addition to its excellent performance, the ATG7200 features a compact design, long lifespan, low cost, and ease of operation. These characteristics make it widely applicable in fields such as DNA sequencing, flow cytometry, cell sorting, optical instruments, spectroscopic analysis, Holography Interferometry, and physical experiments.
| Light Source | |
| Working Temperature | 10-35℃ |
| Lifespan | 10000 hours |
| Pulse Width | <25ns |
| Single Pulse Energy | ATG7200-532: 1-100μJ ATG7200-1064: 1-200μJ |
| Working Mode | Acousto-optic Q-switch |
| Longitudinal Mode | Single mode |
| Peak Power | ATG7200-532: 1-4kW ATG7200-1064: 1-8kW |
| Repetition Rate | 1-1000Hz |
| Polarization Ratio | ATG7200-532: >100:1, horizontal (vertical optional) ATG7200-1064: >100:1, vertical (horizontal optional) |
| Average Power Stability | <5%，<3%(over 4 hours) |
| Beam Divergence (full angle) | <2 mrad |
| Beam Diameter at Aperture | ~2mm |
| Preheat Time | <20min |
| Cooled Method | Water cooling |
