Your shopping cart is empty!
What are raman microspectrometer from Webpetsupply?
ATP2000P low cost, uncooled;
ATP5020 cooled down to -5℃;
ATP5020R cooled down to -10℃;
ATP6500 cooled FFT-CCD, crossed C-T replace QE65 Pro, high sensitivity, high quantunm efficiency>90%, super SNR & Dynamic range, cooled down to -20℃;
ATP8000 cooled down to -30℃, 0.05-5nm resolution, high sensitivity.
How is the detector cooling technology working?
Detector cooling technology, this is TEC, this is stage 1 cooling, this is stage 2 cooling, and this looks like tower is stage 3 cooling, what're these coolers working principle? It's actual PN knot, you can power on electricity to access from this side, here is cooling, and the heat is transferred to here is heating. heating can bring heat away can cool down the temperature. Through reverse current from left side, this position change to heating, and this side is cooling. If the current go in this side is cooling, opposit go in the other side is heating.
PN tube is here, TEC integrated inside make the sensor looks metal housing tougher, uncooled detector use plastic housing, the detector heat is relative small, no need to use metal.
What benefits can the cooled detector bring?
In the short integration time, the cooled or not has little influence, but the longer the integration time the cooled detector in -20 degree has smaller dark current, but in the room temperature has the bigger dark current.
next let's see dark noise and temperature curve, In -20 degree the dark noise is small, but in room tepmperature, the dark noise is so big, the dark current of uncooled detector is decades times higher than the cooled.
1st, dark current is smaller, the integration time can be longer, and 2nd, noise is small.
ATP6500 spectrometer can cooled down to -15 degree, and cooled integration time lasting 1.3hrs. ATP5020P spectrometer can cooled down to -5degree, and integration time last 10mins.
Why the cooled detector employs higher performance?
Let's take the ATP6500 for example, when cooled down to 100ms, dark current is only 80counts, 16bit A/D, noise is 7, when the integration is 10s, the dark current is 245, when the integration time is 10s, the noise is only 10, when the integration time is 60s, the dark current is only 1100, and the noise is only 30, it's ease to run over a hour, and noise level is so small, that's why the ATP6500 cost higher but quite reasonable for such good performance.
Why the cooled spectrometer size is longer?
The cooled spectrometer has longer size for being installed fans inside and ventilation port, 2nd cooled spectrometer has bigger power consumption, so it has external power port, common spectrometer can use USB connect, but cooled spectrometer shall have power port.
Why Webpetsupply's spectrometers employs higher reliability than competiors?
Some competitors' optical bench being fasten on metal platform, the optical chamber and electrical chamber are completely divided, which can avoid electrical board volatile chemical polluting optical components, this optical bench is fasten direct on pcb, but Webpetsupply optical bench is fasten on metal platform, you can see the alluminum alloy thermo expansion coefficiency is only 18, but pcb is over 155, the reliability has improved over 10 times.
Let's see our spectrometer test result that the intensity stability change rate is only 0.37%, long time stability is only 0.14% also very good figure testify high stability.
How many topology structure of optical path for a spectrometer?
There are commonly divided into 4 types of optical path, including crossed C-T, M-shape C-T, concave grating optical path, transmittance grating opitcal path.
Crossed C-T: ATP2000P,ATP2002, ATP2400, ATP1010, ATP5020P, ATP5040, ATP6500
M-shape C-T: ATP3030, ATP3034, ATP3330/4 ATP5030, ATP5034, ATP5330/4
Concave grating: ATP4230, ATP4020, ATP4050, ATP4070
let's see the M-shape optical path looks like a number "3", so our models uses the 3rd number "3" to indicate M-shape optical path models.
In generally, topology structure can decide resolution, sensitivity, stray light, and size of a spectrometer.
Crossed C-T topology structure employs better sensitivity and compact size.
M-shape C-T employs higher resolution and better stray light.
Concave grating optical path employs high stray light.
What are application of spectrometers?
1st, Environmental industries:
UV smoke analysis
Multi-parameters online water quality analysis
No reagenet online water quality analysis
2nd, Industrial Inspection:
Colorimeter, colors sorting
Emissivity,Transmittance Measure
Laser wavelength monitor
LED color temp sorting
Film thickness measure meter
Glass thick measure meter
Process Analysis Technology（PAT）
3rd, Biomedical industries:
spectrophotometer
Fully automatic biochemical analysis
Fluorescence Spectroscopy
4th, Scientific instrument
Fluorescence Spectroscopy；
Chemical Lighting
Photoluminescence
Electroluminescence
LIBS or Ionoluminence
Liquid Chromatogram
BestSeller
Webpetsupply ATP2000P has a low-noise, high-performance, and cost-effective. The sensor used 2048 pi..
ATP2000SH high-speed micro-spectrometer is a low-noise, high-performance, high-speed, miniature fibe..
ATP2700 high-sensitivity micro-spectrometer is a high-sensitivity, high-transmittance micr..
With 20 years of experience in the development of optic..
Webpetsupply ATP5020 lowcost miniature raman spectrometer employs the high-performance-to-price rati..
ATP5020P is a high-performance micro raman spectrometer developed by Webpetsupply. It uses a 2048*64..
High-Sensitivity & High-Resolution, TE-Cooled Back-Thinned Spectrometer
120.00″W x 208.00″D x 47.00″H
ATP5200
ATP5200 is the fifth generation of TE-cooled high performance&nbs..
ATP5020R Raman spectrometer as a new generation NIR response enhanced of TE-cooled high performance ..
Webpetsupply ATP6500 Scientific-Class UV-VIS-NIR Spectrometer employs ultra-high performance, 1044 x..
Scientific grade, ultra-high sensitivity, transmission grating imaging spectrometer
0.00″W x 0.00″D x 0.00″H
ATP6750
ATP6750 high-sensitivity miniature spectrometer is a high-sensitivity, high-transmittance, spatial-r..
ATP6500DC and ATP6500EM are self-developed deep cooling scientific-grade spectrometer by Webpetsuppl..
ATP8000-5-26 is self-developed by Webpetsupply to replace NIR Quest features competing performance c..
BestSeller
ATP8200-5-26 is self-developed by Webpetsupply to replace NIR Quest features competing performance c..
ATP8200 family is a new generation of NIR spectrometer, newly developed by Webpetsupply on the basis..
Mid-IR spectrometer employs smart size, and it employs 128 pixels pyroelectric linear array sensor, ..
120.00″W x 208.00″D x 47.00″H
ATP5200
0.00″W x 0.00″D x 0.00″H
ATP6750
